DITTO MIC LOOPER
- Pure Looping with unlimited overdubs
- Easy set up with Intelligent Mic Gain
- Total control – with 2 Switches or Mic ControlTM
INSTANT LAYERED MASTERPIECES
- Go from idea to performance in an instant, with ease. One knob, two buttons – it couldn’t be simpler! With its superior audio quality, unlimited overdubs and Undo/Redo, Ditto Mic Looper is the essential choice for looping vocals and instruments.
WATCH IT WORK
NEW! INTELLIGENT MIC GAIN
- Using Ditto Mic Looper is exactly like plugging a mic directly into the PA – you only need to set input gain once, at the mixer. No more trial-and-error to find the optimal balance between input gain on your effects unit and the mixing desk.
IT’S THIS SIMPLE . . .
- Press LOOP to record. Press again to play the loop. Repeat for endless overdubs. Hold to undo/redo latest overdub.
- Press STOP to stop all loops, press again to restart play from the beginning – or hold it for a quick, noiseless erase.
. . . AND THIS VERSATILE
- As a singer, beatboxer, horn-blower, percussionist, or string-player, the power and musical ease of Ditto Mic Looper cannot be overstated.
THE MAGIC OF TWO SWITCHES
- The dedicated STOP switch on Ditto Mic Looper means that you can pause your loop exactly when you want, without having to double-tap to stop and fudge your timing – as on single switch units.
- This means that your LOOP button is totally focussed on your looping creation with Record/Play/Overdub functions.
PURE LOOPING . . . NO FLUFF
- Intelligent Mic Input Gain for Quick and Painless Setup.
- Built In Mic Control, Infinite Overdubs and Loop Storage.
- Intuitive LED Indicator for Modes; Dedicated Loop Switches.
- Quiet Mic Preamp with Phantom Power, Balanced XLR Out, Power & USB for Updates.
CONTROL
- Loop level
- Loop Record/Play/Overdub (or Record/Overdub/Play configuration)
- Loop Stop/Erase
- Intelligent Mic Input Gain
- Mic Control™
DIMENSIONS
- Height: 5.4 inches (140 mm)
- Width: 3.5 inches (90 mm)
- Depth: 2.3 inches (60 mm)
- Weight: 0.92 lb. (0.42 kg)
CONSTRUCTION
- Two part dies cast metal
- Rubberized base
ANALOG INPUTS
- Input Connector: XLR Female, balanced
- Input Impedance: 2.7 kOhm balanced
- Maximum Input Level: -1 dBu
- Signal to Noise Ratio: 112 dB A-weighted
- Phantom Power: 32V (always on)
ANALOG OUTPUTS
- Output Connector: XLR Male, balanced
- Output Impedance: 250 Ohms balanced
- Maximum Output Level: -1 dBu
- Dynamic Range: >104 dB, 20 Hz to 20 kHz
- Frequency Response: +0/-0.3 dB, 20 Hz to 20 kHz
CONTROL
- USB for firmware and control
- Mic Control using TC-Helicon MP-75 Microphone or Sennheiser e835 FX mic
POWER
- Power Supply (Supplied): 12V .4A
- Power Consumption: 5.6W
SAFETY
- EMC – Complies with EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B
- Safety – certified to IEC 65, EN 60065, UL6500 and CSA IEC 65, EN 60065, UL6500 and CSA
ENVIRONMENT
- Operating Temperature: 32°F to 122°F (0°C to 50°C)
- Storage Temperature: -22°F to 167°F (-30°C to 70°C)
- Humidity: Max. 90 % non-condensing
WHAT’S IN THE BOX?
- Region specific power supply
- USB cable
- User guide
