Fender Pre-Wired Strat Pickguard, Hot Noiseless SSS 3-Ply Tortoise 11 Hole Pickguard

$499.00

Call us for a Great Rate on Fast Australia-Wide Shipping 02-4421-8688

In stock

SKU: 0992346500 Categories: ,

Fender Pre-Wired Strat Pickguard, Hot Noiseless SSS 3-Ply Tortoise 11 Hole Pickguard

• Hot Noiseless Pickups
• Polysol-coated magnet wire
• Ceramic magnets deliver scorching output
• Flush-mount pole pieces for even string response
• Vinyl-coated output wire and plastic bobbins

Fender Pre-Wired Strat pickguards are a quick and painless easy way to give your guitar a makeover by replacing your old pickguard and pickups. The Fender Strat Hot Noiseless SSS SHELL offers a faux tortoiseshell pickguard hand-assembled in the same Californian factory as their iconic guitars.
Fitted with a trio of Hot Noiseless Single-Coil Strat pickups, pickup switch, potentiometers and fully finished electrics, there isn’t an easier way to customise your guitar’s tone.

There’s not much left for you to do other than remove the old pickguard, solder the output jack and ground wires, bolt on the new pickguard and head out into the world armed with classic Fender tone.

The common denominator of the Hot Noiseless Single-Coil Strat pickups is their noise immunity. Noiseless pickups are the bedrock of the modern Fender sound delivering revered classic Fender tones with dynamics and shimmering clarity without the accompanying hum.

Specifications:

• Series: Fender Pre-Wired Pickguards
• Model Number: 0992346500
• UPC: 885978207268
• Pickup Configuration: SSS
• Orientation: Right-Hand
• Pickguard Colour : 3-Ply Tortoiseshell
• To suit: Fender Stratocaster®
• Country Of Manufacture: US
• Pickup Covers: Aged White
• Control Knobs: Aged White
• Switch Tip: Aged White
• Hardware Finish: Chrome
• Mounting Type: 11-Hole Modern
• Bridge Pickup: Hot Noiseless™ Single-Coil Strat®
• Middle Pickup: Hot Noiseless™ Single-Coil Strat®
• Neck Pickup: Hot Noiseless™ Single-Coil Strat®
• Lead Wire: Vinyl-covered
• Magnet: Ceramic
• Magnet Wire: Polysol-coated
• Shielded: Yes
• Pole Pieces: Flush Mount
• Bobbin Material: Nylon
• Controls: Master Volume, Tone 1. (Neck Pickup), Tone 2. (Bridge/Middle Pickup)
• DC Resistance: Neck/Middle/Bridge: 10.4k
• Inductance: Neck/Middle/Bridge: 2.8 Henries
• Potentiometers: CTS 250K Volume & Tone
• Shipping Dimensions: W‎31.12 x L24.13 x H5.72 cm / 2.25 x 12.75 x 13.50″
• Shipping Weight: 825.54g